Rotary Coupling Hydraulic-manufacture,factory,supplier from China

This series product is the new hydraulic coupling reducer developed by our company for the solid control circulation system of drilling mud pump.The combination of fixed pipe oil discharge and inlet valve control is adopted to adjust the speed, which has the advantages of starting with load, overload protection, isolating torsion-vibration, reducing impact, stepless speed regulation and fast and steady clutch.

Independent air coollingThis type of hydraulic coupler adopts the same water-cooling system with the diesel engine, which is installed on the common chassis, easy to install and transport, safe and reliable to operate.Combined water coolingThis type of hydraulic coupler adopts an independent fan cooling system for the ahead gear box, which is suitable for the selection of all types of drilling rigs.Input speed600～1500 r/minTransfer power range600～1300 kWRated slip3%Rated power≥96%Reduction ratio1.1～3.3（According to user form a complete set of circumstances specific determination）Packing and de

The electric motor coupling power unit is driven by electric motors and makes full use of power grid resources, which realizes the electric driving transformation of traditional mechanical drilling machine, reduces drilling cost, improves economic benefits, effectively reduces drilling noise, and has no exhaust emission, thus greatly improving the working environment.The unit is powered by a high-power electric motor, and users can make full use of cheap grid power resources to reduce the drilling cost by 30% ~ 45%.

Characteristic(1) The large zero moment coefficient and high transmission efficiency can improve the working efficiency of the drilling machine.(2) To reduce or even eliminate the impact on the diesel engine and rig transmission parts, improve the service life.(3) When the rig is stuck or overloaded, the diesel engine will not shut off.(4) Even if the engine is running at full speed, the working mechanism of the rig (rotary table and drilling pump) can be operated for a long time at low speed by changing the amount of oil filled by the torque converter.(5) With the change of external load, the

Widely used in drilling RIGS, special petroleum vehicles, heavy trucks, engineering vehicles, pump groups, pumping stations and other fields.At present, it is used in all major drilling and oil field special vehicle plants for on-board drilling RIGS and cement trucks, with reliable and stable performance, perfectly replacing similar mainstream products at home and abroad, and highly recognized by users.Rated ouput power410kWRated input speed2100r/minInput interfaceSAE NO.1Force reclaimer interfacetwo，Top PTO、Side PTOGear and speed ratiosix-speed/three-speedHydraulic retarder/distributor boxsel

This series of diesel engine is based on the Z12V190B diesel engine, the reliability, economy and power of the diesel engine has been comprehensively improved and upgraded, to solve the problem of three leaks, while the appearance quality and maintenance have been greatly improved, so as to better meet the power requirements of various oil RIGS, generator sets and construction machinery.DescriptionGenset modelRated power kwRatation speed  r/minEngine modelHydraulic transmission couplerHeight of centerHydraulic transmission coupling setG12V190PZL-1/O engine with hydraulic coupling7401

So as to better meet the power requirements of various oil drilling rigs, generator sets and construction machinery.2000 series diesel engine can be matched with torque converter engine set, Hydraulic transmission coupling set and diesel generator set, used for driving drilling rigs or mud pumps, and can also be matched with fire pump, flood pump, etc.Genset model500GF-TAlternator modelSiemens technology,Brushless excitation,Automatic voltage regulationControl panelGPL500Rated power500kWRated voltage400V/480V/6300V/10500V/13800VRated Frequency5

Product descriptionThe natural gas generator -L20V190ZLT-1 engine, the engine is a 16V gas engine prototype design and manufacture of a high-intelligence, low heat consumption, high reliability, low emissions, long life of the 20V gas engine. L20V190ZLT-1 electronically controlled mixing engine speed of 1000r/min, stand-alone power of 2000kW. Instantaneous power up to 2200kW. The instantaneous power can be up to 2200kW.The gas engine generator system consists of natural gas engine, generator, general chassis, high elasticity coupling, control cabinet and so on.

Product descriptionThe gas-fired generator uses -L20V190ZLT-1 engine, which is a super-intelligent, low-energy, high-reliability, low-emission, long-life 20V fuel engine designed and manufactured based on a 16V fuel engine. L20V190ZLT-1 electronically controlled external engine with a speed of 1000r/min and a stand-alone power of 2000kW. The instantaneous power can reach 2200kw.The generator set equipment is composed of 20V gas engine, generator, common chassis, super elastic coupling, management cabinet and so on. The unit is fitted with ideal gas inlet, DC starter and electrical controls.

Smooth operation, low noise. The number of rotor teeth inside and outside the cycloidal rotor pump is only one tooth, when they do relative movement, the sliding speed of the tooth surface is small, and the mesh point is constantly moving along the tooth profile of the internal and external rotor, so the two rotor tooth surfaces wear each other less.

Jichai is a domestic leader in high-power gas engines, and has been committed to the development and manufacturing of gas-fueled engine products. At present, the company has developed multi-power segment and various specifications of gas engines, 1512 series gas engines, which adopt WOODWARD's gas mixing technology, advanced electronic control and lean combustion technology.

140 series engine is applicable to oil truck-mounted drilling rigs, mobile power stations, emergency power supply, engineering machines and trucks. The engine performance parameters reached advanced international standards.Engine code 140Pre-mixing before turbochargeAir and gas mixed before compressor, low requirement for gas inlet pressure.Air and gas mixed in long pipe, well mixedDigital ignition controlle

 L20V1902LT-2type closed-loop electrically controlled external mixing natural gas machine features:1、Turbocharger pre-mixing technology, where gas and air are sucked in at the same time in the compressor, to be suitable for low pressure gas,2，The rarefied combustion technology uses WOODWARD's E6 control system to accurately control the air-fuel ratio.Reach the high - altitude combustion ratio, achieve rarefied combustion3，The single point injection and air - fuel ratio closed - loop control technology can realize the closed - loop control of air - fuel ratio (in).The engine can adjust

Jichai began developing high-power turbocharged natural gas engines in 1982. From 1984 to 1988, three prototype tests were carried out in the laboratory, 10,000 hours of industrial tests were carried out in Shengli Oilfield, and on October 12, 1988, it was recognized by the state as a 600kW/1000r/min external hybrid supercharged high-power gas engine.

Turbocharger pre-mixing technology, where gas and air are sucked in at the same time in the compressor, to be suitable for low pressure gas.Rarefied combustion technology, WOODWARD's E6 control system is used to control the air-fuel ratio accurately to reach the high - altitude combustion ratio, rarefied combustion.The single point injection and air - fuel ratio closed - loop control technology can realize the closed - loop control of air - fuel ratio (in).The engine can adjust the amount of air and natural gas according to the requirements of different working conditions and different spe

At present, Jichai is not content with the market demands within the power range of 1000kW~2000kW.It is necessary to develop 190 series gas generator sets covering the power segment of 1000kW~2000kW, so as to maintain the advantage of cost over foreign gensets.

Jichai series 140 engine is a high-performance, high-speed engine developed by Jichai in cooperation with AVL with all intellectual property rights，It has the feature of high pressure, low energy consumption, high reliability, long - life, meets the TIER2 and European Ⅲ emission standards，it is widely used in oil vehicle drilling rigs, oil specials, wellsite generator sets, mobile power stations or backup power sources, construction machinery, trucks and other fields.

CNPC Chai Gas (coal mattress methane) electricity technology merchandise had beenfirst used in Jincheng region in 2003.

CNPC Chai Gas (coal bed methane) power generation products were first used in Jincheng area in 2003. Since 2005, the company has increased r&d investment in coal mine gas power generation products, paid attention to communication and cooperation with relevant research institutes of coal mines, and established close ties with China Coal Bed Methane Society, Henan University of Science and Technology, Fushun Coal Branch General Institute and other coal design institutes.

Filter element removal tool partsSpark plug sleevePiston fixtureParts of the turning mechanismThe above general special tools are provided free of charge at the time of delivery; These tools are used in the daily maintenance of the equipment to facilitate customers to grasp the status of the equipment in time.

The engine adopts modular design, high pressure common rail, high pressure, closed breathing system and other advanced international internal combustion engine technology, meet the low emission standards, widely used in ship projects. Engine Series140 marine engine（300-457KW)Engine ModelJC15C-3 marine engineTypeFour stroke, supercharged intercooling, water cooling, high pressure common rail ECU electronic control jetCylinders & Arrangement6 cylinders, in-lineCylinder bore,mm140Piston Bore,mm165Rated Power,kW/hp450/612RPM,r/min1800Total Piston Displacement ,L15.2Fuel oil consumption ra

It can meet the requirements of gas and electricity double starting, remote operation, engine parallel and so on.The products cover a wide range of power, can meet the needs of customers in different power segments, products have passed the CCS certification.Engine Series2000 series（330-1320KW)Engine Model6190ZLC-3 marine engineTypeFour stroke, pressurized intercooled, water-cooled, direct-injection combustorCylinders & Arrangement6 cylinders, in-lineCylinder bore,mm190Piston Bore,mm210Rated Power,kW/hp400/540RPM,r/min1200Total Piston Displacement ,L35.73Fuel oil consumption rate,g/kW.h≤20

The role of the cylinder head is to seal the gas, form a combustion space with the piston, and withstand the role of high temperature and high pressure gas. The working condition of the cylinder head is: (1)the cylinder head is subjected to the action of high temperature and high pressure gas, and bears a large bolt pre-tightening force, resulting in large mechanical stress. (2)The structure of the cylinder head is complex, and the temperature field is seriously uneven, resulting in large thermal stress, which will cause cracks and overall deformation of the cylinder head

This type of product uses the international high-power internal combustion engine mature parts, while expanding the original 190 cylinder diameter series diesel engine power, reduce fuel consumption and emissions, improve the average effective pressure, improve the overall reliability and safety of the product. The series products are widely used in oil drilling business, Marine power, offshore drilling platform and other fields.