Outboard Boat Motors-manufacture,factory,supplier from China

The electric motor coupling power unit is driven by electric motors and makes full use of power grid resources, which realizes the electric driving transformation of traditional mechanical drilling machine, reduces drilling cost, improves economic benefits, effectively reduces drilling noise, and has no exhaust emission, thus greatly improving the working environment.The unit is powered by a high-power electric motor, and users can make full use of cheap grid power resources to reduce the drilling cost by 30% ~ 45%.

Chemical substrate: silica gelCuring time: 72 hoursHardness: 33 ATensile rate: 350%Ignition point: 200 oFSurface debonding: 30 minMaximum temperature: 260ºCMixing ratio: WipeDielectric strength 25 kV/mmTensile strength: 1Specific gravity: 1.3Viscosity: thixotropic

During the operation of the engine, metal scraps, dust, carbon deposits oxidized at high temperatures, colloidal sediments, and water are constantly mixed with lubricating oil. The role of the oil filter is to filter out these mechanical impurities and glia, keep the lubricating oil clean, and extend its service life.

Fast response service, complete quality system, huge storage system, fast logistics system; These are our professional embodiment, do accessories we are professional.

High pressure steel wire braided hose operating temperature: oil -40℃ ~ 100℃, air -30℃ ~ 50℃, water emulsion +80℃ below.High pressure steel wire braided hose specification range: DN5mm ~ DN102mm.

Smooth operation, low noise. The number of rotor teeth inside and outside the cycloidal rotor pump is only one tooth, when they do relative movement, the sliding speed of the tooth surface is small, and the mesh point is constantly moving along the tooth profile of the internal and external rotor, so the two rotor tooth surfaces wear each other less.

We are one of the professional component suppliers and manufacturers in China;Our products are available globally; We have meticulous and professional services; We have a complete warehousing and transportation system.

The efficiency of its air exchange is higher than that of the natural intake of the general engine. When the air enters the turbocharger, its temperature will rise significantly, and the density will become smaller accordingly. The intercooler plays the role of cooling the air, and the high-temperature air is cooled by the intercooler and then enters the engine. If the lack of an intercooler and let the pressurized high temperature air directly into the engine, it will cause the engine to knock or even damage the flame.

Technical Characteristics
1,Designed and manufactured as per API613 and ISO13631.;
2,Horizontally and symmetrically balanced sructure,with an accurate weight diference in reciprocating parts in each row,can effectively balance the inertia force and inetia moment,so that the compressor unit can operate with a small vibration and a low noise;
3.Highly stiff bare compressor mectanism optimized via mechanical treatment can eliminate wall surface vertical to force drection,so that the bearing capacity can be increased;
4.Bearing surtace of transmlsslon part is suoject to a low tpecific pressure val

The above tools are necessary special tools in the operation and maintenance process of the equipment, which are specially designed by our company to facilitate the maintenance, inspection and regular maintenance of the equipment, and play a convenient and easy-to-use role in the disassembly and installation of important components.

The gearbox can be used to reduce the speed and load of transport ships and engineering ships.

Filter element removal tool partsSpark plug sleevePiston fixtureParts of the turning mechanismThe above general special tools are provided free of charge at the time of delivery; These tools are used in the daily maintenance of the equipment to facilitate customers to grasp the status of the equipment in time.

The engine has the characteristics of high power density, high efficiency, light weight, compact structure, long overhaul cycle and humanized maintenance design.The product is suitable for natural gas website, pressure pumping station, underground gas storage compression station and other projects, which can meet the needs of national energy conservation and emission reduction projects such as large gas power stations and distributed energy systems.The thermal efficiency of the engine is greater than 44%, and the power, economy and reliability have reached the international advanced level.Prod

Jichai is a domestic leader in high-power gas engines, and has been committed to the development and manufacturing of gas-fueled engine products. At present, the company has developed multi-power segment and various specifications of gas engines, 1512 series gas engines, which adopt WOODWARD's gas mixing technology, advanced electronic control and lean combustion technology.

Turbocharger pre-mixing technology, where gas and air are sucked in at the same time in the compressor, to be suitable for low pressure gas.Rarefied combustion technology, WOODWARD's E6 control system is used to control the air-fuel ratio accurately to reach the high - altitude combustion ratio, rarefied combustion.The single point injection and air - fuel ratio closed - loop control technology can realize the closed - loop control of air - fuel ratio (in).The engine can adjust the amount of air and natural gas according to the requirements of different working conditions and different spe

CNPC Chai Gas (coal bed methane) power generation products were first used in Jincheng area in 2003. Since 2005, the company has increased r&d investment in coal mine gas power generation products, paid attention to communication and cooperation with relevant research institutes of coal mines, and established close ties with China Coal Bed Methane Society, Henan University of Science and Technology, Fushun Coal Branch General Institute and other coal design institutes.

This series product is the new hydraulic coupling reducer developed by our company for the solid control circulation system of drilling mud pump.The combination of fixed pipe oil discharge and inlet valve control is adopted to adjust the speed, which has the advantages of starting with load, overload protection, isolating torsion-vibration, reducing impact, stepless speed regulation and fast and steady clutch.

Independent air coollingThis type of hydraulic coupler adopts the same water-cooling system with the diesel engine, which is installed on the common chassis, easy to install and transport, safe and reliable to operate.Combined water coolingThis type of hydraulic coupler adopts an independent fan cooling system for the ahead gear box, which is suitable for the selection of all types of drilling rigs.Input speed600～1500 r/minTransfer power range600～1300 kWRated slip3%Rated power≥96%Reduction ratio1.1～3.3（According to user form a complete set of circumstances specific determination）Packing and de

Widely used in drilling RIGS, special petroleum vehicles, heavy trucks, engineering vehicles, pump groups, pumping stations and other fields.At present, it is used in all major drilling and oil field special vehicle plants for on-board drilling RIGS and cement trucks, with reliable and stable performance, perfectly replacing similar mainstream products at home and abroad, and highly recognized by users.Rated ouput power410kWRated input speed2100r/minInput interfaceSAE NO.1Force reclaimer interfacetwo，Top PTO、Side PTOGear and speed ratiosix-speed/three-speedHydraulic retarder/distributor boxsel

This series of diesel engine is based on the Z12V190B diesel engine, the reliability, economy and power of the diesel engine has been comprehensively improved and upgraded, to solve the problem of three leaks, while the appearance quality and maintenance have been greatly improved, so as to better meet the power requirements of various oil RIGS, generator sets and construction machinery.DescriptionGenset modelRated power kwRatation speed  r/minEngine modelHydraulic transmission couplerHeight of centerHydraulic transmission coupling setG12V190PZL-1/O engine with hydraulic coupling7401

So as to better meet the power requirements of various oil drilling rigs, generator sets and construction machinery.2000 series diesel engine can be matched with torque converter engine set, Hydraulic transmission coupling set and diesel generator set, used for driving drilling rigs or mud pumps, and can also be matched with fire pump, flood pump, etc.Genset model500GF-TAlternator modelSiemens technology,Brushless excitation,Automatic voltage regulationControl panelGPL500Rated power500kWRated voltage400V/480V/6300V/10500V/13800VRated Frequency5

Series 6000 land-used diesel engine is developed by Jichai with Austria AVL company and domestic well-known colleges and universities, research institutes, and by means of the latest development of internal combustion engine, through the computer-aided design, simulation, finite element analysis and research on the combustion process, the crankshaft torsional vibration of engine and turbocharger matching, into the exhaust system on the basis of the simulation, optimization of design and development.

We have the most professional service, the best quality inspection system, we assure you that the accessories you receive are qualified, the best quality, the longest life, and of course the best cost performance.

 Performance improvement: It can realize self-refueling, face recognition, two-dimensional code scanning, visual voice intercom, automatic sales and automatic payment and other related functions; 32-bit industrial-grade computer chip, durable, efficient and safe; Advanced flowmeter, accurate, stable and durable; Suitable for all kinds of temperature, humidity, altitude.Safety and environmental standards: The whole machine meets the requirements of the corresponding national standards. With anti-cheating, anti-cheating function.