Gasket Spare Part-manufacture,factory,supplier from China

1, we have the most complete parts production and manufacturing system, storage system and transportation system, to ensure that parts arrive in a fast way;2, we have the most professional service and the best quality inspection system, to ensure that the accessories you receive are qualified, the best quality, the longest life.3, accessories are packed in cartons or wooden cases, fumigation-free, waterproof and moisture-proof, the safest protection.

We have the most professional service, the best quality inspection system, we assure you that the accessories you receive are qualified, the best quality, the longest life, and of course the best cost performance.

We have the most complete parts production and manufacturing system, storage system and transportation system to ensure that parts arrive in a fast way;We are one of the leading professional spare parts manufacturers and suppliers in China.

We are one of the most advanced professional spare parts suppliers in China.To provide you with qualified, high-quality and inexpensive accessories is our goal, equipment safe and efficient operation is the purpose; Accessories supply is the basis; The safe and efficient operation of the equipment is our common pursuit.

During the operation of the engine, metal scraps, dust, carbon deposits oxidized at high temperatures, colloidal sediments, and water are constantly mixed with lubricating oil. The role of the oil filter is to filter out these mechanical impurities and glia, keep the lubricating oil clean, and extend its service life.

Fast response service, complete quality system, huge storage system, fast logistics system; These are our professional embodiment, do accessories we are professional.

Chemical substrate: silica gelCuring time: 72 hoursHardness: 33 ATensile rate: 350%Ignition point: 200 oFSurface debonding: 30 minMaximum temperature: 260ºCMixing ratio: WipeDielectric strength 25 kV/mmTensile strength: 1Specific gravity: 1.3Viscosity: thixotropic

High pressure steel wire braided hose operating temperature: oil -40℃ ~ 100℃, air -30℃ ~ 50℃, water emulsion +80℃ below.High pressure steel wire braided hose specification range: DN5mm ~ DN102mm.

We are one of the professional component suppliers and manufacturers in China;Our products are available globally; We have meticulous and professional services; We have a complete warehousing and transportation system.

The O-ring friction resistance is small, the dynamic and static friction force is equal, is the "0" shape rubber ring friction 1/2-1/4, can eliminate the "crawling" phenomenon of low speed, low pressure movement.The O-ring has high wear resistance and automatic elastic compensation function after the sealing surface is worn.O-rings have good self-lubricating properties.

We have the most professional internal combustion engine parts production, quality inspection, supply, storage system, has the most complete parts sorting and packaging management chain, has a wealth of global parts delivery and supply experience; We have the technical consulting and diagnostic engineers who will reply to you immediately, and solve the problems in the operation of the equipment for you online; Provide equipment operation management consulting and suggestions; Video can help customers solve problems in operation.601.03.30BRocker arm cross bridge parts601.03.40Rotating mechanism

Technical Characteristics
1,Designed and manufactured as per API613 and ISO13631.;
2,Horizontally and symmetrically balanced sructure,with an accurate weight diference in reciprocating parts in each row,can effectively balance the inertia force and inetia moment,so that the compressor unit can operate with a small vibration and a low noise;
3.Highly stiff bare compressor mectanism optimized via mechanical treatment can eliminate wall surface vertical to force drection,so that the bearing capacity can be increased;
4.Bearing surtace of transmlsslon part is suoject to a low tpecific pressure val

Accessories Policy:Quality and customer first, excellent service and quality based on the guarantee of parts life.Warranty: The warranty period of the compressor unit is 8,000 hours from the date of first operation after the completion of the installation acceptance test; Or within 1 year from the date of delivery (whichever comes first).

Working mediumNatural gas, coal bed gas, shale gas, oil field associated gas, flash vapor, air, nitrogen, carbon dioxide, hydrogen, nitrogen hydrogen and so on.Spare parts supplyAccording to the loss of supporting parts, such as connecting rod, cross head, compression cylinder, distance plate, power piston, piston rod, power cylinder head, compression piston, compression piston rod, bearing bush, connecting rod bearing bush, copper bearing bush, cross head pin, air valve assembly, etc., the company has established a compressor spare parts library, which covers all kinds of parts and has suffic

The above tools are necessary special tools in the operation and maintenance process of the equipment, which are specially designed by our company to facilitate the maintenance, inspection and regular maintenance of the equipment, and play a convenient and easy-to-use role in the disassembly and installation of important components.

Filter element removal tool partsSpark plug sleevePiston fixtureParts of the turning mechanismThe above general special tools are provided free of charge at the time of delivery; These tools are used in the daily maintenance of the equipment to facilitate customers to grasp the status of the equipment in time.

The efficiency of its air exchange is higher than that of the natural intake of the general engine. When the air enters the turbocharger, its temperature will rise significantly, and the density will become smaller accordingly. The intercooler plays the role of cooling the air, and the high-temperature air is cooled by the intercooler and then enters the engine. If the lack of an intercooler and let the pressurized high temperature air directly into the engine, it will cause the engine to knock or even damage the flame.

CNPC Ji Chai Gas (coal bed methane) power generation products were first used in Jincheng area in 2003. Since 2005, the company has increased r&d investment in coal mine gas power generation products, paid attention to communication and cooperation with relevant research institutes of coal mines, and established close ties with China Coal Bed Methane Society, Henan University of Science and Technology, Fushun Coal Branch General Institute and other coal design institutes.

Product descriptionThe natural gas generator -L20V190ZLT-1 engine, the engine is a 16V gas engine prototype design and manufacture of a high-intelligence, low heat consumption, high reliability, low emissions, long life of the 20V gas engine. L20V190ZLT-1 electronically controlled mixing engine speed of 1000r/min, stand-alone power of 2000kW. Instantaneous power up to 2200kW. The instantaneous power can be up to 2200kW.The gas engine generator system consists of natural gas engine, generator, general chassis, high elasticity coupling, control cabinet and so on.

The electric motor coupling power unit is driven by electric motors and makes full use of power grid resources, which realizes the electric driving transformation of traditional mechanical drilling machine, reduces drilling cost, improves economic benefits, effectively reduces drilling noise, and has no exhaust emission, thus greatly improving the working environment.The unit is powered by a high-power electric motor, and users can make full use of cheap grid power resources to reduce the drilling cost by 30% ~ 45%.

The piston works under high temperature, high pressure, high speed and poor lubrication.

The role of the cylinder head is to seal the gas, form a combustion space with the piston, and withstand the role of high temperature and high pressure gas. The working condition of the cylinder head is: (1)the cylinder head is subjected to the action of high temperature and high pressure gas, and bears a large bolt pre-tightening force, resulting in large mechanical stress. (2)The structure of the cylinder head is complex, and the temperature field is seriously uneven, resulting in large thermal stress, which will cause cracks and overall deformation of the cylinder head

Precision engine management system;Fine control of main combustion chamber and pre-combustion chamber;Load balancing controlLeading thermal efficiency (international :42-45%; Current test thermal efficiency :44%);System safety (installation of explosion-proof device, double-wall gas pipe and oil mist detector);Thin combustion in the cylinder;Ultra-low emission;Self-cleaning filtration technologyThe oil filter can be automatically cleaned without replacing the filter.

Integrated intelligent charging pile, high power density 30kW/40kW/1000V module, peak efficiency over 96%; With intelligent power distribution strategy, equipped with intelligent algorithm, a single gun can output 30kW, 60kW, 90kW, 120kw four power segments.Input voltage: AC380V±15%Output voltage: DC200-1000VConstant power range: DC300-1000VPeak efficiency: ≥96%Display screen: 7 inchesProtection class: IP54Protection class: IP65Charging method: Swipe card by code VIN code/backgroundWorking temperature: -30℃~+50℃