500kW Coal Mine Gas Gensets-manufacture,factory,supplier from China

CNPC Chai Gas (coal bed methane) power generation products were first used in Jincheng area in 2003. Since 2005, the company has increased r&d investment in coal mine gas power generation products, paid attention to communication and cooperation with relevant research institutes of coal mines, and established close ties with China Coal Bed Methane Society, Henan University of Science and Technology, Fushun Coal Branch General Institute and other coal design institutes.

CNPC Chai Gas (coal mattress methane) electricity technology merchandise had beenfirst used in Jincheng region in 2003.

This series of units adopts the international advanced computer control technology, and the thin combustion technology is applied, aiming at the characteristics of coal mine gas concentration fluctuation, through the reasonable matching of the intake system, making this kind of products in the adaptability is particularly high, can adapt to all kinds of coal mine gas; Methane concentration can cover 8%-60%, pressure range 3-15kPa can be applied, its comprehensive performance, lubricating oil consumption, safety and reliability have reached the international leading level.

CNPC Ji Chai Gas (coal bed methane) power generation products were first used in Jincheng area in 2003. Since 2005, the company has increased r&d investment in coal mine gas power generation products, paid attention to communication and cooperation with relevant research institutes of coal mines, and established close ties with China Coal Bed Methane Society, Henan University of Science and Technology, Fushun Coal Branch General Institute and other coal design institutes.

At present, Jichai is not content with the market demands within the power range of 1000kW~2000kW.It is necessary to develop 190 series gas generator sets covering the power segment of 1000kW~2000kW, so as to maintain the advantage of cost over foreign gensets.

Product descriptionThe 500kW biogas generator adopts 12V190ZL gas engine as the unique power. It is designed and manufactured with excellent quality, long service life, convenient operation, low maintenance cost, low speed and high speed, low gas consumption, low fuel quality requirements, strong environmental adaptability and balance High and low volatility.

The gearbox can be used to reduce the speed and load of transport ships and engineering ships. It can meet the requirements of gas and electricity double starting, remote operation, engine parallel and so on.The products cover a wide range of power, can meet the needs of customers in different power segments, products have passed the CCS certification.

Working mediumNatural gas, coal bed gas, shale gas, oil field associated gas, flash vapor, air, nitrogen, carbon dioxide, hydrogen, nitrogen hydrogen and so on.Spare parts supplyAccording to the loss of supporting parts, such as connecting rod, cross head, compression cylinder, distance plate, power piston, piston rod, power cylinder head, compression piston, compression piston rod, bearing bush, connecting rod bearing bush, copper bearing bush, cross head pin, air valve assembly, etc., the company has established a compressor spare parts library, which covers all kinds of parts and has suffic

Product descriptionBiogas power generation technology science is a new type of power comprehensive utilization technology know-how that integrates environmental safety and energy saving.

So as to better meet the power requirements of various oil drilling rigs, generator sets and construction machinery.2000 series diesel engine can be matched with torque converter engine set, Hydraulic transmission coupling set and diesel generator set, used for driving drilling rigs or mud pumps, and can also be matched with fire pump, flood pump, etc.Genset model500GF-TAlternator modelSiemens technology,Brushless excitation,Automatic voltage regulationControl panelGPL500Rated power500kWRated voltage400V/480V/6300V/10500V/13800VRated Frequency5

Jichai is a domestic leader in high-power gas engines, and has been committed to the development and manufacturing of gas-fueled engine products. At present, the company has developed multi-power segment and various specifications of gas engines, 1512 series gas engines, which adopt WOODWARD's gas mixing technology, advanced electronic control and lean combustion technology.

Product feature:100%  intellectual property of companyInternational Control Technology (EGS Engine Management System)）International mainstream air-fuel ratio control technology (TECJET air-fuel ratio automatic regulation management system)Large flow and high pressure intake automatic management system of adapting to a wide range of concentration changesLow pressure intake and rarefied gas combustion control technology (suitable for low pressure gas, lower emission)Engine seriesEngine modelEngine modelH16V190ZLT-1 gas engineCylinders & Arrangement16 cylinders V typeCylin

The engine has the characteristics of high power density, high efficiency, light weight, compact structure, long overhaul cycle and humanized maintenance design.The product is suitable for natural gas website, pressure pumping station, underground gas storage compression station and other projects, which can meet the needs of national energy conservation and emission reduction projects such as large gas power stations and distributed energy systems.The thermal efficiency of the engine is greater than 44%, and the power, economy and reliability have reached the international advanced level.Prod

Product descriptionLandfill gas engine generators are well-established products in our product line. After years of painstaking research, the product incorporates the rich profit-making experience of the 12V190 gas engine, and the automation function of the unit is significantly enhanced. Reliable air-fuel ratio automatic control technology enables the unit to have higher gas applicability, stronger comprehensive performance and economy, and successfully reduces the emission index to the minimum.

Jichai began developing high-power turbocharged natural gas engines in 1982. From 1984 to 1988, three prototype tests were carried out in the laboratory, 10,000 hours of industrial tests were carried out in Shengli Oilfield, and on October 12, 1988, it was recognized by the state as a 600kW/1000r/min external hybrid supercharged high-power gas engine.

In order to meet the market demand of long-distance pipeline compressor drive power, offshore drilling platform power, large gas power station, distributed energy and other market demand, 3MW natural gas engine came into being, the product adopts 26/32 series gas engine, with independent intellectual property rights.

 L20V1902LT-2type closed-loop electrically controlled external mixing natural gas machine features:1、Turbocharger pre-mixing technology, where gas and air are sucked in at the same time in the compressor, to be suitable for low pressure gas,2，The rarefied combustion technology uses WOODWARD's E6 control system to accurately control the air-fuel ratio.Reach the high - altitude combustion ratio, achieve rarefied combustion3，The single point injection and air - fuel ratio closed - loop control technology can realize the closed - loop control of air - fuel ratio (in).The engine can adjust

Turbocharger pre-mixing technology, where gas and air are sucked in at the same time in the compressor, to be suitable for low pressure gas.Rarefied combustion technology, WOODWARD's E6 control system is used to control the air-fuel ratio accurately to reach the high - altitude combustion ratio, rarefied combustion.The single point injection and air - fuel ratio closed - loop control technology can realize the closed - loop control of air - fuel ratio (in).The engine can adjust the amount of air and natural gas according to the requirements of different working conditions and different spe

The role of the cylinder head is to seal the gas, form a combustion space with the piston, and withstand the role of high temperature and high pressure gas. The working condition of the cylinder head is: (1)the cylinder head is subjected to the action of high temperature and high pressure gas, and bears a large bolt pre-tightening force, resulting in large mechanical stress. (2)The structure of the cylinder head is complex, and the temperature field is seriously uneven, resulting in large thermal stress, which will cause cracks and overall deformation of the cylinder head

L20V1902LT-2 type closed-loop electrically controlled external mixing natural gas machine features:1、Turbocharger pre-mixing technology, where gas and air are sucked in at the same time in the compressor, to be suitable for low pressure gas,2，Rarefied combustion technology，WOODWARD's E6 control system is used to control the air-fuel ratio accurately to reach the high - altitude combustion ratio, rarefied combustion3，The single point injection and air - fuel ratio closed - loop control technology can realize the closed - loop control of air - fuel ratio (in).The engine can adjust the amount

Product features: 100% intellectual property of companyInternational common Control Technology International advanced air-fuel ratio control technology Large flow and high pressure control system can adapt to a wide range of concentration changesLow pressure intake and rarefied combustion control technology      Advanced set management moduleOnline maintenance technologyDigital monitoring technology Distributed power system Engine modelG12V190ZLDT-2 gas engineCylinders & Arrangement12 cylinders V typeCylinder B

With the improvement and promotion of H16V190 series generator sets, the share of Jichai gas generator sets in the gas power generation market has increased year by year, and the market share of 1000kW low-concentration gas generator sets has reached more than 90%. At present, in the power range of 1000kW~2000kW, the market has burst into greater vitality.

140 series engine is applicable to oil truck-mounted drilling rigs, mobile power stations, emergency power supply, engineering machines and trucks. The engine performance parameters reached advanced international standards.Engine code 140Pre-mixing before turbochargeAir and gas mixed before compressor, low requirement for gas inlet pressure.Air and gas mixed in long pipe, well mixedDigital ignition controlle

It has the characteristics of high efficiency, low emission, high pressure, high power, green, environmental protection and so on. The engine's gas consumption is as low as 8,500 kJ/kW·h and its thermal efficiency is higher than 44%. The product can be compared with international first-class products in power performance, fuel economy and operation reliability.Engine modelCylinders & ArrangementCylinder bore,mmPiston stroke,mmRated power ,kWRPM,r/minTotal piston displacement,LHeat consumption ratekJ/kW.hLub.