4l80 Torque Converter-manufacture,factory,supplier from China

Characteristic(1) The large zero moment coefficient and high transmission efficiency can improve the working efficiency of the drilling machine.(2) To reduce or even eliminate the impact on the diesel engine and rig transmission parts, improve the service life.(3) When the rig is stuck or overloaded, the diesel engine will not shut off.(4) Even if the engine is running at full speed, the working mechanism of the rig (rotary table and drilling pump) can be operated for a long time at low speed by changing the amount of oil filled by the torque converter.(5) With the change of external load, the

So as to better meet the power requirements of various oil drilling rigs, generator sets and construction machinery.2000 series diesel engine can be matched with torque converter engine set, Hydraulic transmission coupling set and diesel generator set, used for driving drilling rigs or mud pumps, and can also be matched with fire pump, flood pump, etc.Genset model500GF-TAlternator modelSiemens technology,Brushless excitation,Automatic voltage regulationControl panelGPL500Rated power500kWRated voltage400V/480V/6300V/10500V/13800VRated Frequency5

Product feature:100%  intellectual property of companyInternational Control Technology (EGS Engine Management System)）International mainstream air-fuel ratio control technology (TECJET air-fuel ratio automatic regulation management system)Large flow and high pressure intake automatic management system of adapting to a wide range of concentration changesLow pressure intake and rarefied gas combustion control technology (suitable for low pressure gas, lower emission)Engine seriesEngine modelEngine modelH16V190ZLT-1 gas engineCylinders & Arrangement16 cylinders V typeCylin

Jichai is a domestic leader in high-power gas engines, and has been committed to the development and manufacturing of gas-fueled engine products. At present, the company has developed multi-power segment and various specifications of gas engines, 1512 series gas engines, which adopt WOODWARD's gas mixing technology, advanced electronic control and lean combustion technology.

Turbocharger pre-mixing technology, where gas and air are sucked in at the same time in the compressor, to be suitable for low pressure gas.Rarefied combustion technology, WOODWARD's E6 control system is used to control the air-fuel ratio accurately to reach the high - altitude combustion ratio, rarefied combustion.The single point injection and air - fuel ratio closed - loop control technology can realize the closed - loop control of air - fuel ratio (in).The engine can adjust the amount of air and natural gas according to the requirements of different working conditions and different spe

L20V1902LT-2 type closed-loop electrically controlled external mixing natural gas machine features:1、Turbocharger pre-mixing technology, where gas and air are sucked in at the same time in the compressor, to be suitable for low pressure gas,2，Rarefied combustion technology，WOODWARD's E6 control system is used to control the air-fuel ratio accurately to reach the high - altitude combustion ratio, rarefied combustion3，The single point injection and air - fuel ratio closed - loop control technology can realize the closed - loop control of air - fuel ratio (in).The engine can adjust the amount

The redesign of the gearbox can be applied to reduce the impact of speed and load on transport and construction vessels. At the same time, it can also meet the requirements of dual starting (gas starting and electric starting), remote automatic operation, and parallel engine operation. The product has a wide range of power coverage, which can meet the needs of customers in different power sizes, adapt to different ship types and other market segments.

Jichai began developing high-power turbocharged natural gas engines in 1982. From 1984 to 1988, three prototype tests were carried out in the laboratory, 10,000 hours of industrial tests were carried out in Shengli Oilfield, and on October 12, 1988, it was recognized by the state as a 600kW/1000r/min external hybrid supercharged high-power gas engine.

The gearbox can be used to reduce the speed and load of transport ships and engineering ships. It can meet the requirements of gas and electricity double starting, remote operation, engine parallel and so on.The products cover a wide range of power, can meet the needs of customers in different power segments, products have passed the CCS certification.

Advanced genst management module (IG-NT automatic synchronization and automatic load distribution)Online maintenance technology (continuous trouble-free operation time more than 2500 hours)Digital monitoring technology (full monitoring of engine thermal parameters and unit electrical parameters)Distributed energy system (electric-thermal system, electric-hot-cold system)International mainstream control technology (EGS Engine Intelligent Management System)International advanced air-fuel ratio control technology (TECJET air-fuel ratio automatic regulation)Large flow and high pressure intake syst

The product design is based on a 12V26/32 diesel engine, whose fuel involves diesel, heavy oil and natural gas. It is a high pressure engine with full intellectual property rights jointly developed by Geichai and AVL of Austria. It is a series of engines with 100% intellectual property rights, medium speed supercharged, great success, low fuel consumption, high reliability and long life, jointly developed by Geichai and AVL of Austria.

The 140 series engine is another small-bore unit jointly developed by Jichai and AVL, which is a high-performance high-speed engine with full intellectual property rights of the company.

Engine and compressor share one frame and one crankshaft,subject to symmetrically balanced arrangement,so that inertia force and inertia moment can be well balanced and vibration is small;Internal mixing gas injection and loop scavenging can effectively cool and clean cylinders,thereby ensuring that fuel can be controlled and saved;lsolated room of compressed air between compressor frame and engine piston can effectively prevent combustion exhaust from releasing to oil sump,prevent pollutions by lubricating oil and extend the service life;Power cylinder has a simple structure,wi

CNPC Chai Gas (coal bed methane) power generation products were first used in Jincheng area in 2003. Since 2005, the company has increased r&d investment in coal mine gas power generation products, paid attention to communication and cooperation with relevant research institutes of coal mines, and established close ties with China Coal Bed Methane Society, Henan University of Science and Technology, Fushun Coal Branch General Institute and other coal design institutes.

It can meet the requirements of gas and electricity double starting, remote operation, engine parallel and so on.The products cover a wide range of power, can meet the needs of customers in different power segments, products have passed the CCS certification.Engine Series2000 series（330-1320KW)Engine Model6190ZLC-3 marine engineTypeFour stroke, pressurized intercooled, water-cooled, direct-injection combustorCylinders & Arrangement6 cylinders, in-lineCylinder bore,mm190Piston Bore,mm210Rated Power,kW/hp400/540RPM,r/min1200Total Piston Displacement ,L35.73Fuel oil consumption rate,g/kW.h≤20

Technical advantage1、Internal mixing gas injection and loop scavenging can effectively cool and clean cylinders,thereby ensuring that fuel can be controlledand saved;2、Isolated room of compressed air between compressor frame and engine piston can effectively prevent combustion exhaust fromreleasing to oil sump,prevent pollutions by lubricating oil and extend the service life;3、Power cylinder has a simple structure,without such wearing parts as rocker arm,tappet rod,cam,timing mechanism etc.,and with lessquick-wear parts and maintenance works;4、The special sulfur resistant design and manufactur

MAN is the world's leading designer and manufacturer of medium and low-speed diesel engines, which account for nearly 50% of the world's tradable powerIts products use a unique large engine technology.Optimize power and fuel consumption rates while reducing emissions.The product has strong dynamic performance and good economy.High reliability, high safety, good environmental protection quality.Product Series320 Marine EngineModel8L3240TypeFour stroke, supercharged intercooling, water cooling, high pressure common rail ECU electronic control jetCylinders & Arrangement8 cylinders, in

The gearbox can be used to reduce the speed and load of transport ships and engineering ships.

The gearboxes are used for deceleration and load shedding in transport and construction vessels. The products cover a wide power range to meet the needs of customers in different power segments, and the products have passed CCS certification.ModelCylinders & ArrangementCylinders bore,mmPiston stroke,mmRated power,kw/hpRPM,r/minTotal piston displacement,LFuel oil consumption rate,g/kW.hLub.

The above tools are necessary special tools in the operation and maintenance process of the equipment, which are specially designed by our company to facilitate the maintenance, inspection and regular maintenance of the equipment, and play a convenient and easy-to-use role in the disassembly and installation of important components.

Smooth operation, low noise. The number of rotor teeth inside and outside the cycloidal rotor pump is only one tooth, when they do relative movement, the sliding speed of the tooth surface is small, and the mesh point is constantly moving along the tooth profile of the internal and external rotor, so the two rotor tooth surfaces wear each other less.

Filter element removal tool partsSpark plug sleevePiston fixtureParts of the turning mechanismThe above general special tools are provided free of charge at the time of delivery; These tools are used in the daily maintenance of the equipment to facilitate customers to grasp the status of the equipment in time.

Product descriptionThe natural gas generator -L20V190ZLT-1 engine, the engine is a 16V gas engine prototype design and manufacture of a high-intelligence, low heat consumption, high reliability, low emissions, long life of the 20V gas engine. L20V190ZLT-1 electronically controlled mixing engine speed of 1000r/min, stand-alone power of 2000kW. Instantaneous power up to 2200kW. The instantaneous power can be up to 2200kW.The gas engine generator system consists of natural gas engine, generator, general chassis, high elasticity coupling, control cabinet and so on.

Product descriptionThe 500kW biogas generator adopts 12V190ZL gas engine as the unique power. It is designed and manufactured with excellent quality, long service life, convenient operation, low maintenance cost, low speed and high speed, low gas consumption, low fuel quality requirements, strong environmental adaptability and balance High and low volatility.